All DCA dehumidifiers are manufactured to be remote condenser ready with all valves and electrical devices in place to be connected to an outdoor remote condenser. Air cooled remote condensers are used to reject excess heat to the outdoors if the heat generated by the dehumidifier cannot be used for room air heating or pool water heating. This condenser can supplement the room A/C system or be the sole source of room cooling. This condenser shall be large enough to reject all the recovered heat outdoors without simultaneously rejecting heat into the pool water or room air. This condenser shall be capable of operation down to -20ºF.

Units shall be furnished as air-cooled condensers, arranged for vertical airflow. All units to be UL listed.
Unit of Measure

Standard Features

  • Vertical Discharge
  • Weather-tight Electrical Enclosure
  • Computer Designed Condenser Coils
  • Full-flooding System (-20 ºF Capability)
  • Fully Assembled on Heavy Skids

Refrigeration Circuit(s)

N/A Single
Number of Connections1 N/A 1 Set

Number of Fans

N/A 1

Shipping Weight

N/A 96 lb

Operating Weight

N/A 77 lb

Recommended Dehumidifier Model at 95ºF

Sound Level2 N/A Standard


N/A Ratings are subject to change without notice
Supply O.D.3 N/A 3/8 in

Return O.D.1

N/A 3/8 in

MCA/MOPD: 208/230 - 1 Phase

N/A 15.0/15

MCA/MOPD: 208/230 - 3 Phase

N/A 15.0/15

MCA/MOPD: 460 - 3 Phase

N/A 15.0/15
Diagram4 N/A
Dimensions for Models LORC 1.5 - 4
  • 1 For line set sizes refer to dehumidifier design specifications.
  • 2 For dB information please contact factory.
  • 3 For line set sizes refer to dehumidifier design specifications.
  • 4 Dimensions are subject to change without notice