All DCA dehumidifiers are manufactured to be remote condenser ready with all valves and electrical devices in place to be connected to an outdoor remote condenser. Air cooled remote condensers are used to reject excess heat to the outdoors if the heat generated by the dehumidifier cannot be used for room air heating or pool water heating. This condenser can supplement the room A/C system or be the sole source of room cooling. This condenser shall be large enough to reject all the recovered heat outdoors without simultaneously rejecting heat into the pool water or room air. This condenser shall be capable of operation down to -20ºF.
Unit of Measure

Standard Features

N/A
  • TEFC Permanently Lubricated Motor
  • Computer Designed Condenser Coils
  • Belt Drive Blower with Sealed-for-life Bearings
  • Full-flooding System (-20 ºF Capability)

Recommended Dehumidifier Model at 95ºF

N/A DCA2500A/2500AWH

Shipping Weight

N/A 260 lb

Note

N/A Ratings are subject to change without notice
Supply O.D.1 N/A 5/8 in

Return O.D.1

N/A 3/8 in

Blower Horsepower

N/A 1.5 hp

FLA 60Hz @ 208/230V - 1 PH

N/A 8.8

FLA 60Hz @ 208/230V - 3 PH

N/A 5

FLA 60Hz @ 460V - 3 PH

N/A 2.5

MCA/MOPD: 208/230 - 1 Phase

N/A 11/15

MCA/MOPD: 208/230 - 3 Phase

N/A 6.25/9

MCA/MOPD: 460 - 3 Phase

N/A 3.125/5

CFM

N/A 3200

Blower Size

N/A 12 in

M.B.H. @ 30 Diff.

N/A 89.8
Diagram2 N/A
Diagrams for ORC-Series-Outdoor-Air-Cooled-Remote-Condensers

A

N/A 30 in

B

N/A 45 in

C

N/A 25 in

D

N/A 22.5 in

E

N/A 40 in

F

N/A 13.5 in

G

N/A 15.625 in

H

N/A 5.5 in

I

N/A 10 in

J

N/A 2 in
  • 1 For line set sizes refer to dehumidifier design specifications.
  • 2 Dimensions are subject to change without notice